Reverb (Output Effect)

Effect Rack

1. Power Switch Toggles the reverb on (blue) or off (gray).
2. Mix Knob Adjusts the amount of reverb.
3. Decay Knob Sets the reverb’s decay length.
4. Low Cut Knob Attenuates low frequencies when knob is turned clockwise.
5. High Cut Knob Attenuates high frequencies when knob is turned counterclockwise.

Description ⚓︎

The built-in Reverb effect module can add depth to any instrument. Click on the Effects module configuration button (gear) to fine-tune the reverb parameters.

If you need reverb at an arbitrary point in your patch, if you wish to have more control over the reverb parameters, or if you want to add reverb to a patch built with the Multiphonics CV‑3 Effect plug-in, use the Reverberator module.