Effects
Top Row (Instrument)
- Power Switches Toggle each effect on (blue) or off (gray).
- Amount Knobs Adjust the dry/wet mix of each effect.
- Configuration Button Opens the effect configuration panel.
Description ⚓︎
The Effect module controls whether each built-in output effect is active or not, and how much of each effect is applied. The effect is active when its power switch is blue and its amount knob is not set to minimum. In the image above, only the Chorus effect is active.
This module is available only in the standalone application and instrument plug-in versions, where it is always present in the top row and cannot be removed.
The four built-in effects are the Distortion, the Chorus, the Delay and the Reverb. They are processed in series from top to bottom.
The configuration button (gear icon) opens a panel where each effect can be fine-tuned.
The Effect module is fully automatable when Multiphonics CV‑3 is used as a plug-in in a DAW.