Delay (Output Effect)

Effect Rack

1. Power Switch Toggles the delay on (blue) or off (gray).
2. Mix Knob Adjusts the amount of delayed signal in the output.
3. Delay Knob Sets the delay time.
4. Feedback Knob Sets the amount of feedback.
5. High Cut Knob Attenuates high frequencies from the delayed signal when knob is turned counterclockwise.

Description ⚓︎

The built-in Delay effect module can add an echo effect to any instrument. The delay time is automatically synchronized to the Master Clock tempo. Click on the Effects module configuration button (gear) to fine-tune the delay parameters.

If you need a delay at an arbitrary point in your patch, if you wish to have more control over the delay parameters, or if you want to add delay to a patch built with the Multiphonics CV‑3 Effect plug-in, use the Delay module.