Dual Delay

1. Time Knob Delay time, from 1 millisecond to 8 seconds.
2. Feedback Inputs Dedicated inputs for signal fed back into the delay line. Normalled to the module outputs.
3. Feedback Gain Knob Adjusts the gain of the feedback inputs. Can be modulated with the Mod input below.
4. Clear Input Gate input. When high, delay line is cleared and no new signal is stored until input goes low.
5. Clear Button Manual trigger for the Clear input.
6. Delay Inputs Signals present on these inputs will be delayed by the specified time before going to the corresponding Out jacks.
7. Delay Outputs Mix of the delayed inputs and feedback signals.

Overview ⚓︎

The Dual Delay delays its two input signals by the specified amount of time. It can be used with audio or CV signals.

It contains two delay lines with independent signal paths that share the same time and gain settings. It was designed as a simple building block for stereo effects such as ping pong delay, stereo chorus or stereo flanger.

The Dual Delay module otherwise works exactly like the Delay, so please refer to that module’s manual page for in-depth explanations.